ISV – Tahoe – Cargo Barrier Installation Manual
V112414
www.ibissv.com
724-431-2080
F: 724-431-4361
4
4.
Install the both the driver and Passenger side lower Cargo Barrier mounting brackets:
a.
Align both of the lower mounting bracket hole with the threaded floor mounting hole and hand
tighten the provided 10MM bolts and 10MM flat washers.
b.
Align the Cargo Barrier against the two lower mounting brackets upper attachment holes.
c.
Attach the Cargo Barrier to the two lower mounting brackets by inserting on each, 2 carriage bolts
and flanged serrated nuts.
5.
Install the driver side Upper Support Strap:
a.
Remove the rear OEM Plastic Headliner Ceiling Cover by pulling it
away from the ceiling taking care to not brake any clips.
b.
Loosely attach the driver side Upper Support Start to the top of the
Cargo Barrier using 2 each of the 1/4-20 x 3/4" HHCS, flat SAE
washers, and 1/4-20 flanged serrated nuts.
c.
Remove and save the OEM rear hatch hinge mounting nut and
washer that lines up with the rear of the Upper Support Strap located
on the ceiling and under the previously removed OEM Plastic Ceiling
Cover.
d.
Insert the rear hole on the Upper Support Strap onto the OEM stud.
e.
Reattach the OEM nut and washer onto the OEM stud to securely
hold the rear of the Upper Support Strap.
Содержание 7013-310-036429
Страница 1: ......