Copyright Velocomp LLP 2005-2013
5
STEP TWO: PURCHASE/INSTALL POWERSTROKE
KEY
NOTE: IF YOU HAVE PURCHASED AN IBIKE NEWTON POWER METER
WITH THE POWERSTROKE KEY PRE-INSTALLED, SKIP THIS STEP
AND PROCEED TO STEP 3!
1. Purchase a PowerStroke Key from the iBike Store.
2. You will receive an email from Velocomp, instructing you to email the
serial number of your Newton.
3. To obtain the serial number of your Newton, do the following:
1.
Attach your Newton to your Mac/PC.
2.
Turn on your Newton (click any button; screen lights-up)
3.
Launch the Isaac software
4.
Go to “Device/SN and FW Version…”
5.
In a few seconds, the serial number of your Newton will appear in a
window.
6.
Copy and paste your serial number into your reply email
4. Velocomp will send you a return email, with the PowerStroke key
included as an attachment.
5. To install the PowerStoke key into your Newton, do the following:
1.
Transfer the PowerStroke key from the email to your computer’s
Desktop
2.
Attach your Newton to your Mac/PC.
3.
Turn on your Newton (click any button; screen lights-up)
4.
Launch the Isaac software
5.
Go to “Device/Unlock Feature…”
6.
Follow the prompts to navigate to your PowerStroke key
