iBells DS 80-70, Руководство оператора

Страница: 17 / 20

16

Tool should be kept clean, especially its air vents. Keep the
tool and ventilation slots (air vents) clean and free from
obstructions. Accumulation of dust in the motor or on the base
may cause a malfunction of the tool.

Do not use chemical cleaners to clean your tool. Wipe it clean
with a dry cloth.

Cleaning the guard; When accumulation of dust or chips on the
guard looks excessive, loosen the screw (with the allen key
provided) and remove the cover. Wash off accumulation of dust
inside and reinstall it.

For storage , we recommend using the original package for
covering the product or a suitable means to protect it against
dust.
Before and after each use, check the product and accessories (or
attachments) for wear and damage.

Inspecting the rotating accessory; Check the sanding pad and
disc carefully for cracks or damage before and after each use.
Continuing to use a dull disc may cause a dangerous kickback
and/or motor overload. Dressing could be suitable or replace with
a new disc as soon as it no longer works effectively.

Inspecting the supply cord; Do not pull or carry the tool by the
electric cord or allow its contact with edges, sharp elements,
rough surfaces, oil or chemicals that may damage its flexible and
insulating properties.

Inspecting carbon brushes; Keep the brushes clean so that they
move freely on the support. Remove and inspect the carbon
brushes once in a while.
CLEANING AND STORAGE
MAINTENANCE AND REPAIR
IBL DS80-70|90
NOTE:
This product does not contain any parts that can be
repaired by the consumer. Contact an authorised service centre
or a similarly qualified person to have it checked and repaired.