10
Proper hand position requires one hand on the
side/auxiliary handle (2), while other hand on the
main handle.
Always use the auxiliary handle.
The auxiliary handle can be swivelled by 360˚
To reposition and/or swivel the handle, loosen the
hand grip (as shown in the figure), move the
handle to the desired position along the barrel and
securely retighten the hand grip.
This tool uses hexagonal accessories of 17 mm for holding the bit. A
flat and pointed chisel bits are available with the product.
INSERTING/REMOVAL OF BIT:
Pull and hold locking sleeve backward. Insert the bit into the bit
holder, while twisting and pushing inward until it locks
automatically into place. Pull outward on the accessory to be
certain it is locked into the bit holder.
To remove the bit, pull and hold locking sleeve backward and pull
bit forward. All accessories should be wiped clean after removing.
Clean the insert shank end of the accessory to remove any debris,
then lightly grease with a lubricant.
INSERTING AND REMOVING BIT
Hex shank
cross-section
AUXILIARY HANDLE
IBL DH10-78
