iBell CS85-71, Руководство оператора

Страница: 6 / 18

5

Keep your hands away from cutting area and the blade. Hold the
saw by insulated gripping surfaces only and second hand on the
auxiliary handle or motor housing
. Keep the handle of the saw
dry, clean and free from oil. Keep your body positioned to either
side of the blade, but not in line with the blade.

Do not hold the material to be worked in your hands , your legs or
feet, it’s important that the material be adequately clamped
down , reducing the contact with the body and the possibility of
losing control.

Do not operate the tool on surfaces under which there might be
electrical wires, and water or gas pipes
. The contact with wires
or water might cause electrical shocks. The motor generates sparks
that, if in contact with flammable gases, might cause explosion.

Always use saw blades of correct sizes . *Suitable blade might be
available with the product, use of it is highly recommended. Blades
with shapes that don’t match the backing flange on which they’ll
be assembled will work in an irregular way, causing loss of control
of the tool.

Do not overload the saw , use it only for the adequate purpose.
Using the saw for purposes that are different from what indicated
in this manual might lead to hazardous situations.

Wait for the blade to come to a complete stop , there is a period
of inertial movement before the tool stops after turned OFF.

Avoid sawing overhead . Be extra careful when cutting in high or
hard-to-reach locations.

The use of this tool create and/or spread dust that may cause
serious and permanent respiratory injuries
. To reduce the
exposure to these substances, work in well-ventilated places and
always
use dust mask.

Wear ear protectors. Exposure to noise can cause hearing loss.
Wear safety goggles or eye protection when using this power
tool. For additional protection against electric shock, be sure to
wear rubber gloves.
CIRCUALR SAW SAFETY WARNINGS
IBL CS85-71