iBell CS85-71, Руководство оператора

Страница: 13 / 18

12
The Rip fence (Straight edge guide) (11) allows sawing parallel to an
edge at a max distance of about 15 cm.

Loosen the fence lock knob (10).

Insert the rip fence into the saw base through the slot.

Set it to the required distance. Tighten the lock knob.
Two sets of sighting notches at the front of the base plate provide
guidance when performing free-hand cuts following a pencil line.

When viewed from the front of the saw use the left hand side
notch for 0° cuts and the right hand sight notch for 45° cuts.

Sight along either edge of the notch, depending on which side of
the line you wish to cut.

For straight cuts , align the 0° position on the front of the base
with your cutting line.

For 45° bevel cuts , align the 45° position with the line.
IBL CS85-71
MOUNTING THE RIP FENCE
SIGHTING NOTCHES
11
10
0° 45°