iBell CA12-95, Руководство оператора

Страница: 9 / 12

8

Remove the valve cover from the tire you want to pump up.

Make sure valve from the car tyre inflator is unlocked (the thump
latch from the valve should be pulled open to unlock and if the
thumb latch is up against the hose then locked)

Place the valve from the inflator onto the air valve of the tire. It
should slip firmly into place over the threaded tip of the valve.

Push down on the thumb latch on the inflator's valve to lock into
place.

Connect the car cigarette lighter adapter of the inflator to the
cigarette adapter of the car. (some cars may need to be turned on
for the cigarette lighter to have power, so make sure that the
engine is running)

Make sure the inflator is sitting on a flat surface

Turn ON the switch of the inflator and it will start pumping air
into the tire.

To illuminate/turn flashlight on, simply press the light switch to
required positions.

Always monitor the inflator and the tire as air is being pumped.
Check
the air pressure gauge on the inflator to monitor the status
of the tire.

Once the gauge reaches the recommended tire pressure, turn OFF
the inflator.

Uncouple the inflator's valve from the tire and replace the tires
valve cover.
GENERAL OPERATION
TIRE INFLATION
IBL CA12-95
WARNING!
Unless directions are followed, physical injury or
property damage may result. When using the compressor, never
leave it unattended.