iBell Tools IBL ID 13-80, Руководство оператора

Страница: 14 / 20

13
The variable speed gear control (7) is used to switch between two
working modes. When the gear is set to position ‘
1(-) ’, the speed will
decrease and the drill will have greater power* and torque. When
the gear is set to position ‘
2(+) ’, the speed will increase and the drill
will have less power* and torque.
WARNING!
Only change the rotational direction when the product
is switched off and has come to a complete stop! Always ensure that the
forward/reverse rotation control is adjusted to the correct position
depending on the intended operation! Always push the forward/reverse
rotation control as far as it will go! Do not use the product with the
control switch in any other intermediate position!
TWO-SPEED GEAR CONTROL
IBL ID13-80|TD13-100
Switch the device ON by pressing the ON/OFF switch (6) and OFF by
releasing the switch. It is also a variable speed switch that delivers
higher speed and torque with increased trigger pressure.
ON/OFF TRIGGER SWITCH
7
6