IBEA IB 260, Инструкция по безопасности и эксплуатации

Страница: 14 / 28

- 14 -
9. TRANSPORTATION OF THE MACHINE
LOADING AND UNLOADING FROM A VEHICLE
§
For transportation it is preferable to use a vehicle with an open bed.
§
Choose firm, flat ground.
§
Switch off the vehicle
’
s ignition, pull on the hand brake and block the tyres with chocks
to prevent accidental movement of the vehicle.
§
Do not stand in front of the machine
§
Firmly hook the loading ramps onto the vehicle bed. Use stable load ramps with a non-
slip surface strong enough to take the weight of the machine. The inclination of the
ramps must not exceed 15°.
Recommended length : at least 3
1
/
2
times the vehicle bed
’
s height from the ground.
Recommended width : to be chosen according to the wheel width of the machine
§
Proceed with the loading of the machine, manoeuvring it carefully.
§
During loading and unloading on the ramps, avoid activating the blade engagement
clutch.
§
Align the machine
’
s front skid with the centre of the loading ramps.
§
Take care when the machine passes from the loading ramps to the vehicle bed, because
a shift in balance occurs.
§
Once loaded, block the machine wheels using chocks and firmly tie the machine to the
vehicle.
§
Given its outdoor use, it is advisable not to use the scarifier when it is raining.
§
The area next to the engine exhaust may reach a high temperature.
WARNING
Danger of burns.
§
Do not go near water fountains or precipices and do not cross narrow bridges during
work operations to prevent the risk of falling.
§
Do not work on steep banks with gradients in excess of 10°.
§
Work on flat ground for the utmost safety.
E) AFTER USE
§
Before moving away from the machine switch off the engine by moving the switch
(Fig.1,ref.I) to the 0 position.
§
For greater safety shut off the feed cock (Fig. 5a).