IBEA IB 260, Инструкция по безопасности и эксплуатации, Страница: 11 / 28

- 11 -
7. ASSEMBLY INSTRUCTIONS FOR THE HANDLEBARS
The scarifier is delivered with the handlebar disassembled (Fig.2 ref A). Remove the
crating or cardboard packaging (this should be disposed of properly, in compliance with
current regulations in force).
To assemble, proceed as follows:
§
Raise the handlebar (Fig. 2 ref. A) and fit it into the support (Fig. 2 ref. F) by securing it
using the special rings (Fig. 2 ref. E).
§
Fit the screws ( Fig 2 ref. B) in the hole in the handlebar support (Fig 2 ref. F). Position
the washers (Fig. 2 ref. C) on the relative screws ( Fig. 2, ref. B) and tighten the nuts
(Fig. 2 ref.D) firmly.
Figure 2
Before start-up all parts of the machine must be correctly assembled.