• The VariMax50 UL/CSA is part of a range of control units adapted for optimum control
of rotary heat exchangers, with the necessary additional functions. The range consists of
three sizes: VariMax25 UL/CSA, VariMax50 UL/CSA and VariMax100 UL/CSA.
All control units run a 3-phase stepping motor.
All control units have an input signal of 0-10 V.
• The VariMax50 UL/CSA is designed for rotors up to 2500 mm with a rotor speed of max.
12 rpm. If the rotor requires a faster rotor speed, the rotor diameter should be reduced.
• The VariMax50 UL/CSA has built-in input signal shift, which means that the rotor's
efficiency is proportional to the input signal.
• The VariMax50 UL/CSA has a preset threshold value of 0,1 V (hysteresis 0,13–0,07 V).
If the input signal falls below this value, the rotor will stop.
• The VariMax50 UL/CSA has a rotation monitor (magnet mounted on the rotor with
associated magnet sensor) and a built-in cleaning function.
The functions can be disconnected via DIP switches.
• The VariMax50 UL/CSA starts automatically after voltage drop-out, and
resets all alarms on restart.
• The VariMax-motor50 is a stepper motor with substantial moment over the entire speed
range.
• When the motor is stationary, a holding torque is activated, which means that the rotor
always remains still.
The holding torque disappears if the voltage to the control unit is lost.
• The motor is mounted with a 3 m cable as standard.
5
4
DESCRIPTION OF FUNCTIONS
