BoilerNet Interface Controller II
3
V1.00.6
The site information must be entered into the "site.dat" file, and optionally the "alerts.dat" file before the
BoilerNet Interface Controller can be used. There are many text editors (WordPad
®
, for example) can be
used to edit these files (please note that Windows NotePad
®
cannot be used). A computer with an
appropriate operating system and a "SD" card slot is required. Most versions of Windows
®
, Linux
®
, or
MAC
®
O/S should have a text editor that can be used to edit the "site.dat" and "alerts.dat" files. The
example shown here is using Windows WordPad.
Please note that some versions of Windows, particularly XP, may not properly recognize the FAT partition
on the SD-Card. DO NOT allow Windows to format the SD-Card if a prompt to this affect appears.
Cancel the operation, and use a computer with a more current version of Windows (or another O/S) and
up-to-date drivers and service patches, that properly recognizes the SD-Card.
Important:
When editing the files:
Do not alter any characters before the "=" sign in each line.
Do not enter a "\" or any other non-standard characters into any of the fields.
Do not alter any file other than the "site.dat" file on the SD-Card.
The file name is case sensitive. Do not alter or rename it.
After saving the settings, you should use the "Safely Remove" option in your computer's operating
system (if available) before removing the SD-Card from your computer.
