![background image](http://html1.mh-extra.com/html/ibase-technology/rp-103-smc/rp-103-smc_user-manual_604824074.webp)
66
RP-103-SMC User Manual
4.1
Building BSP Source
4.1.1
Preparation
The suggested host platform is Ubuntu 12.04 and 14.04 in 32-bit and 64-bit
versions.
1. Install necessary packages before building:
$ sudo apt-get install gawk wget git-core diffstat unzip texinfo gcc-multilib \
build-essential chrpath socat libsdl1.2-dev
i.MX layers host packages for a Ubuntu 12.04 or 14.04 host setup are:
$ sudo apt-get install libsdl1.2-dev xterm sed cvs subversion coreutils texi2html \
docbook-utils python-pysqlite2 help2man make gcc g++ desktop-file-utils \
libgl1-mesa-dev libglu1-mesa-dev mercurial autoconf automake groff curl lzop asciidoc
i.MX layers host packages for a Ubuntu 12.04 host setup only are:
$ sudo apt-get install uboot-mkimage
i.MX layers host packages for a Ubuntu 14.04 host setup only are:
$ sudo apt-get install u-boot-tools
2. Decompress the BSP source file (e.g. RM-N8M-bsp-20200901.tar) into
"/home/" folder.
4.1.2
Installing Toolchain
Run ./fsl-imx-wayland-glibc-x86_64-meta-toolchain-
aarch64-toolchain-4.14-sumo.sh
Содержание RP-103-SMC
