IBASE Technology MPT-3000V, Руководство пользователя

Страница: 86 / 100

78 MPT-3000V User Manual
⚫
Setting CB UVP Voltage
MCU provides command to set under voltage protection of cat battery,
when car battery voltage is lower than CB UVP setting value, MCU will
check the voltage of UPS battery whether change power source to
UPS battery or not.
⚫
Setting PB UVP Voltage
MCU provides command to set under voltage protection of UPS
battery, when UPS battery voltage lower than PB UVP setting value,
MCU will check the voltage of car battery whether change power
source to car battery or not.
⚫
Setting CB Good Voltage
MCU provides command to set CB good voltage protection of cat
battery, when CB voltage level higher than CB good voltage start
charging UPS battery.
⚫
Setting PB Good Voltage
MCU provides command to set PB good voltage protection of UPS
battery, when system on and car battery voltage lower than CB good
and UPS battery voltage higher than PB good. System will change
power source to UPS battery.
⚫
Getting current CB & PB Voltage
MCU provides command to get current car battery voltage and UPS
battery voltage.
⚫
Setting CHG STV Voltage
MCU provides command to set high of UPS battery charging voltage
range, when system on and UPS battery voltage higher than CHG
STV. System will charge UPS battery.
⚫
Setting CHG SPV Voltage
MCU provides command to set UPS battery charging range, when
system on and UPS battery voltage lower than CHG SPV. System
discharge UPS battery.
⚫
Setting Temperature Offset
MCU provides command to set temperature offset. It can adjust
temperature disparity between system and power board.
⚫
Setting CB Voltage Offset
MCU provides command to set car battery voltage offset. It can adjust
this voltage disparity between actual measurement and detected form
MCU.