IBASE Technology AGS100, Руководство пользователя

Страница: 20 / 73

Hardware Configuration
AGS100 & AGS102 User Manual 13
2
2.1.2 Mini-PCIe & M.2 Cards Installation / Replacement
After removing the bottom cover, follow the instructions below.
1. Locate the mini-PCIe or M.2 slot, align the key of the card to the interface,
and insert the card slantwise.
Mini-PCIe card: M.2 card:
2. Push the card down and fix it with the supplied 2 flat head screws for the
mini-PCIe card and with one screw for M.2 card.
Mini-PCIe card: M.2 card:
2.1.3 WiFi / 3G / 4G Antenna Installation
Thread the WiFi / 3G / 4G antenna extension cable through an antenna hole
of the front I/O cover and fasten the antenna as shown below. Then apply
adhesive to the edge of the hex nut behind the front I/O cover to prevent the
extension cable from falling if the cable becomes loose.
1. Thread and fasten the hex nut and the
washer. Then install the antenna.
2. Apply adhesive around here.
Info:
The diameter of the nut is around 6.35 mm (0.25”-36UNC).