62
➤➤
GIBRALTAR BRIDGE 08 / QUICK CHANGE
08 TAILPIECE
To adjust the string height, turn the stud bolts located at the left
and right ends of the bridge (A) using a slotted (-) screw driver.
Before adjustment, loosen the lock nut using an 8mm nut driver.
After adjustment, tighten the lock nut again to fi x the bridge.
To adjust the tailpiece height, turn the adjustment screws (B)
on both sides with a slotted (-) screw driver. Before adjustment,
loosen the lock nut. After adjustment, fi x it again in the same way
as the bridge. If the lock nut of the bridge and tailpiece is loose,
it may cause distortion or resonance. Raising the tailpiece will
reduce the string tension, which will provide a softer feel and
make it easier to bend the strings.
To adjust the intonation of each saddle, turn the intonation
adjustment screw using a slotted (-) screw driver (C).
Gibralter standard bridge (7-string /
8-string models)
(A)
(B)
To install a new string, pass it through the string stopper ferrule
from the back of the guitar body.
To adjust the height of the strings, use a 1.5mm hexagonal
wrench to turn and adjust the height of each saddle (A).
To adjust the intonation, use a 2.5mm hexagonal wrench to
turn the intonation adjustment screws of each saddle on the
back of the bridge (B).
The adjustment method is the same for 7-string and 8-string
※
models.
A
B
C
Prestage Manual.indb 62
Prestage Manual.indb 62
8/9/2013 11:28:41 AM
8/9/2013 11:28:41 AM
