Hardware Installation Steps:
Hard Disk Installation:
For the first use
，
please install the hard disk in the DVR before switch
on the power.
Note: DVR can run and monitor normally without hard disk, while it
can’t record and playback.
USB Connection
:
You can connect USB mouse, Flash disk, Portable HDD or DVR-RW
on the USB port as available on Front or Back side of DVR.
Power ON:
Plug the power supply and turn on the power supply switch.
Power LED shining indicates DVR is turning ON & booting the OS.
After finishing the startup you will hear a beep, and indicates as
default setting of DVR is ready to connect for further operation.
Note: Incase of abnormal power off, Switch ON the power as DVR
will automatically recover the state before power off.
Power OFF:
To turn off the DVR press the Soft switch as available in menu i.e.:
Entering [Main menu] and Click [Logout] in the [turn off the system]
