Set the recording parameters in the surveillance channel.
You can enter [Main Menu]> [Record]> [Record Config] to set.
The system’s default set is 24 hours continuous recording.
Note: There is at least 1 read-write hard disk if the DVR records
normally.
Picture - 2 Record Config
【
Channel
】
Choose the corresponding channel number to set the
channel. Choose the “all” option to set the entire channels.
【
Redundancy
】
Choose the recording file and backup in two hard
disks. The one is read-write disk, another is redundant disk.
【
Length
】
Set the time length of each video file. 60minutes is
default length.
【
Prerecord
】
Record 1-30 seconds before the action. (File length is
decided by the code stream)
【
Record Mode
】
Set video state: configuration, manual and stop.
Schedule:
Record according to the set video type (regular, detect and
alarm) and time section.
Manual:
Click the “all” button and make the corresponding channel
recording no matter it is in any state.
Stop:
Click the “stop” button and make the according channel stop
recording no matter it is in any state.
【
Period
】
Set the time section of common recording, The recording
