iBall Baton iB-WRB300N, Руководство пользователя

Страница: 32 / 55

300M MIMO Wireless-N Router
(iB-WRB300N)
28
Chapter 6 QoS
6.1 Bandwidth Control
The bandwidth control feature can be used to simultaneously regulate traffic of up to 254
computers on your LAN network. It allows you to regulate a group of PCs’ traffic by specifying a
range of IP addresses.
●
Enable Bandwidth Control : Check/uncheck the box to enable/disable bandwidth control. It is
disabled by default.
●
IP Address : Enter an IP address (same number in both boxes) or a range of IP addresses
(different numbers in two boxes) of the PCs whose traffic you want to regulate.
●
Upload /Download : You can select either to limit Uplink or Downlink Bandwidth of PCs within
the specified IP range.
●
Bandwidth Range : Maximum and minimum data flow which is permitted to be
uploaded/downloaded by computers within a specified IP range. Unit is Kbytes/s. (For WAN
bandwidth range, consult your ISP.)
●
Enable : Check the box to enable current rule. The existing rule will not take effect when left
unchecked.
●
Add to List : Click it to add currently edited bandwidth control rule to the list.
For example : Suppose that you have a 2M WAN connection, then maximum download and
upload rates in theory will be 2Mbps=256KByte/s and 512kbps=64KByte/s respectively. And you
want the PC at the IP address of 192.168.1.100 to have 10-15KByte/s upload and 80-90KByte/s
download rates.
Follow below step :