300M Wireless-N ADSL2+ 3G & Broadband Router iB-WRA300N3GT
22
The following table describes the parameters of this page:
Field
Description
WAN Physical Type
You can select
ADSL WAN
or
Ethernet
WAN
.
Default Route Selection
You can select
Auto
or
Specified
.
VPI
The virtual path between two points in an
ATM network, ranging from 0 to 255.
VCI
The virtual channel between two points in an
ATM network, ranging from 32 to 65535 (1 to
31 are reserved for known protocols)
Encapsulation
You can choose
LLC
and
VC-Mux
.
Channel Mode
You can choose
1483 Bridged
,
1483 MER
,
PPPoE
,
PPPoA
,
1483 Routed
or
IPoA
.
Enable NAPT
Select it to enable Network Address Port
Translation (NAPT) function. When it is
unselected, to access the Internet normally,
you must add a route on the uplink
equipment. Otherwise, the access to the
Internet will fail. Usually it is enabled.
Enable IGMP
You can enable or disable Internet Group
Management Protocol (IGMP) function.
PPP Settings
User Name
For PPP dial-up, enter the user name
provided by your ISP.
Password
For PPP dial-up, enter the password provided
by your ISP.
Type
You can choose
Continuous
,
Connect on
Demand
, or
Manual
.
Idle Time (min)
If
Connect on Demand
is set, you need to
enter the idle timeout time. Within the preset
minutes, if the router does not detect the flow
of the user continuously, it will automatically
disconnect the PPPoE connection.
WAN IP Settings
Type
You can choose
Fixed IP
or
DHCP
.
Содержание baton iB-WRA300N3GT
Страница 1: ...300M Wireless N ADSL2 3G Broadband Router Model No iB WRA300N3GT Ver 1 0 0...
Страница 19: ...300M Wireless N ADSL2 3G Broadband Router iB WRA300N3GT 14 Figure 2 Status 2 Figure 3 Status 3...
Страница 26: ...300M Wireless N ADSL2 3G Broadband Router iB WRA300N3GT 21...
Страница 42: ...300M Wireless N ADSL2 3G Broadband Router iB WRA300N3GT 37...