iB-WAP150N
150M Wireless-N Access Point
13
)
Note:
To build a successful connection by WPS, you should also do the corresponding configuration of
the new device for WPS function meanwhile.
For the configuration of the new device, here takes the Wireless Adapter of our company for
example.
)
Note:
WPS Utility doesn’t support WIN7 & Vista O.S.
I. PBC (Push Button Configuration)
If the new device supports Wi-Fi Protected Setup and the PIN method, you can add it to the
network by PIN with the following two methods. Two ways to configure the WPS by
PIN method
:
If the wireless adapter supports Wi-Fi Protected Setup and the Push Button Configuration (PBC)
method, you can add it to the network by PBC with the following two methods.
PBC Method- I:
Step 1: Press the WPS button on the front panel of the device as shown in Figure 4-6.
Figure 4-6
Step 2: Press and hold the WPS button of the adapter directly for 2 or 3 seconds as shown in
Figure 4-7.
Figure 4-7
Step 3: WPS Utility will automatically start and wait until the next screen appears.
