Manual
ibaPADU-D-8AI-U/-D-8AI-I
24
Issue 1.4
Impedance
Select an input impedance from the dropdown menu for this channel.
Important note
An impedance of 1 M
Ω
together with an input range of ±2.5 V is not supported. If this
combination is selected, an error message will be displayed while validating the configu-
ration.
Min
You can define a lower limit for the measuring range. The analog normalized value
of -10 V is assigned to a physical value, e. g. -100 V.
Max
Here, you can define an upper limit for the measuring range. The analog normal-
ized value of +10 V is assigned to a physical value, e. g. +100 V.
Filter
Here you can activate the antialiasing filters (analog and digital).
Active
The signal will be measured when active.
Actual
Displays the actual value of the signal (only available when the measurement is al-
ready running with the specified configuration).
Further columns can be shown or hidden by using the context menu (right mouse
click in the table header).
