ibaMS16xDO-2A
Manual
Issue 1.3
27
10
iba applications
10.1
Configuration in ibaPDA
You can configure the signals with the I/O Manager of ibaPDA. If the iba-modular system
is already installed and you want to add a new module, click on „Read configuration from
device“. The module will be detected automatically.
Figure 13: Automatic detection of the module
Note
The automatic detection requires a bidirectional FO connection from the ibaPDA com-
puter to the central unit.
Other documentation
If you want to install the iba-modular system at first, refer to the manual of the central
unit, chapter “Configuration with ibaPDA”.
10.1.1 General settings
If the module is detected, click on the module in the signal tree and the “General” tab
appears.
Figure 14: I/O-Manager ibaMS16xDO-2A – General tab
Basic settings
Modul Type
Display of module type (read only)
