ibaCom-L2B-x-8 Manual
Issue 3.2
15
8
Configuration in ibaPDA-V6
Other documentation
For a more detailed description of the board’s configuration in ibaPDA-V6 please refer
to the ibaPDA-V6 manual or online help.
If card has been installed correctly and the license for L2B Profibus is enabled in the
dongle the card should be available in the I/O manager’s signal tree as a data inter-
face. If you click on the interface icon in the tree you will get a simplified image of the
card and essential information in the right part of the dialog. Here, you should set the
required interrupt mode of the card and check the option “In use” in order to reserve the
card for use by ibaPDA-V6 only (and not by other applications such as ibaLogic).
Example: ibaCom-L2B-4-8 in I/O manager of ibaPDA-V6
Each link of the card has assigned up to 4 modules. Different module types to be se-
lected from a list are available for communication via Profibus. The modules have to be
created before you can configure the measurement signals.
Module types
