iB ES-100, Инструкция по эксплуатации

Страница: 4 / 6

02
01- Lid.
02- Juicer Chamber.
03 - Motor Housing Flange.
04- Motor Housing.
05- ON/OFF Switch.
06- Base.
07- Sieve.
08- Jar.
09- Crown for orange.
10- Crown for lemon.
Picture - 01
07
08
01
02
03
04
05
06
07
09
10
Table - 02
*Lack of electric power
source. * The machine does not
switch on.
Problems Causes Soluções
* Problems in the electrical
circuit.
* Check if plu is connected
to its socket, or if there is
electric shortage.
* Crown turns but when in
contact with the product, it
stops. * Crown groove worn uot or
broken.
* Call technical assistance.
* Change the crown.
ES-100
5.2 Electrical Diagram
ON/OFF Switch
1. Introduction
1.1 Safety
The Juice Extractor ES-100 is a machine simple to use and to clean. However
for your safety read the following instructions in order to avoid accidents:
1.1.1 -Unplug the machine when you need to remove any removable part during
cleaning, servicing or any other operation.
1.1.2 - Never make use of any tool or instrument that is not originally part of the
machine during any operation.
1.1.3 - Before switching the machine on check if Crown Nº 09 or 10 and the
Juice Chamber Nº02 (Pic-01) are firmly fitted in their right positions.
1.1.4 - Never throw water directly to the machine.
1.1.5 - Never use inappropriate clothes mainly long sleeves during operation.
1.1.6 - Do not operate the machine wearing wet clothes or wet shoes.
1.1.7 - Before operating the machine be sure it is grounded properly.
1.2 Main Components
All components of this machine were designed and made to its proper function
according to pattern tests and experience of Siemsen.
4.6.2 Advice
Electrical or mechanical maintenance has to be undertaken by qualified personal.
Person in charge has to be sure that the machine is under TOTAL SAFETY conditions
when working.
4.7 Advice
Electrical or mechanical maintenance must be done by qualified personal for such
operation.
Person in charge has to be sure that the machine is under TOTAL SAFETY
conditions when working
5 Analysis and Problems Solving
5.1 Problem, causes and solutions
The Juice Extractor ES-100 was designed to operate with the need of minimum
maintenance but the natural wearing caused by longer use of the equipment may
occasionally cause some malfunctions.
If such problem occurs with your mixer refer to Table 02 in which the most
common situations are listed with recommended solutions.