I A S U S _ I A-X E M L D _ I N S T R U C T I O N S _ v 1 _ 2 0 2 2 0 4
3
Combine
compound A
and
compound B
by kneading them together.
IASUS recommends pulling away and folding both compounds into
itself repeatedly for 30 seconds for best results.
The mixed compound will begin to slightly stiffen to indicate it is
ready for molding.
1. Insert the IA earbuds into your ears.
2. Split the earmold mix into 2 portions.
3. Fill your ear by adding the earmold bit by bit to ensure filling of
all voids and surrounding areas on your ear.
4. During the application of earmold, wrap the compound around
the earbuds to set them.
5. Repeat for the other ear.
3. COMPOUND ACTIVATION
4. APPLY TO YOUR EAR
5. COMPRESS
6. REMOVAL
30 secondes
30 secondes/ear
Using both palms, press the compound into your ear
to further compress the mold. Wait 5 minutes for the
compound to further stiffen and fully set.
To remove your newly created molds, gently
peel them away from your ears. If the molds were
created correctly, the earbuds should be encased in
them and come out attached to them.
f o r
l a s t e s t
n e w s
a n d
p r o d u c t s
,
f o l l o w
u s
o n
s o c i a l
m e d i a
/iasus.concepts
/zerobackgroundnoise
ONLY APPLY COMPOUND AFTER
EARBUDS ARE IN YOUR EARS
!
