![background image](http://html1.mh-extra.com/html/iarp/f-500/f-500_installation-and-use-manual_3188721011.webp)
11
INSTALLATION
To ensure that the appliance operates properly and
to reduce energy consumption, it is important that
the appliance is installed correctly.
Ventilation
The compressor and condenser generate heat and,
therefore, need to be ventilated properly. Rooms with
no ventilation are not suited for installation of the
appliance. Therefore, it should be installed in a room
with an opening (window or French window) that
provide the appropriate amount of air re-circulation. It
is also important to install it in a free humidity room.
During installation, make sure not to cover or obstruct
the grates that allow for proper ventilation of the
appliance. For proper ventilation of the appliance, leave
a space of at least 10 cm between the sides of the
appliance and any adjacent cabinets/walls.
Away from Heat
Avoid positioning the appliance in a place where it is
directly exposed to sunlight or near an oven, cook top
or the like.
Electrical and Earth Connection
The appliance should not be turned on right after
transportation. Two hours is the advised time so that
the oil from the motor-compressor gets back to its
original position.
Before proceeding with the electrical connection, make
sure that the voltage indicated on the rating plate,
corresponds to the mains voltage in your home and that
the socket is fitted with a standard earth wire in
accordance with safety standards. If the socket is not
fitted with an earth wire, the manufacturer will not be
held liability for any damages and or injuries arising out
of the use of the appliance. Do not use multiple sockets
or adapters. Position the appliance in such a way that
you can access the socket where it is plugged in.
Electrical power
The electrical socket must be able to handle the
maximum power load of the appliance, which is
indicated on the rating plate located in the back of the
appliance.
THE APPLIANCE
A - Temperature Adjustment Knob:
By turning the knob from setting
Min (1)
to setting
Max
(4/5)
allows adjusts the temperature inside the
appliance.
B
-
Warning Indicator (Red Light):
When this red warning light comes on for a prolonged
period of time, it means that the freezer is not
functioning properly and the temperature is too high.
This warning light may come on for a brief period when
the lid is left open for an extended period of time (when
the freezer is being loaded or unloaded).
C - Power Supply Indicator (Green Light):
The green light will come on and stay on while the
appliance is connected and is operating normally.
D - Fast Freeze Indicator / Running Compressor
Indicator
(Orange Light)
*:
This yellow indicator light will come on when the
Temperature adjustment knob is turned to the Super
position
E
(if present
).
Models without "Super" function this light (if present)
comes on while compressor is running.
E - The freezing position
*:
The position
Super
, allows the compressor to function
continuously in order to reach the necessary
temperatures for the rapid freezing of fresh food. When
the push button is not pressed, the freezer is
functioning according to the thermostat regulation.
F - Thermometer
G - Internal Light *
H - Defrost water drain system
I - Basket *
J - Ventilating grille
K - Wheels
(depending on the model)
* NOT PRESENT IN ALL MODELS
Содержание F 500
Страница 2: ......
Страница 24: ...MPPAPMAN...