Modello - Modèle - Model
Modell - Modelo
DELIGHT LITE
DELIGHT PRIME
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
PAGE
19/64
N° DOC
UM000327
16. DISPENSER WASH ASSEMBLY
(Optional)
To assemble the dispenser wash, proceed as follows:
Screw in the dispenser wash support (A) with the dispenser
wash (B) using the screw (C) on the back of the equipment.
A
C
B
With water recirculation:
•
Fasten the water filling joint (
3) with the incorporated valve,
positioned as in the illustration, to the tank (2) using the
fastening nut (4);
•
Connect the stainless steel “overflow” tube (
7) to the
bushing (6) and fasten it to the tank with the nut (5);
•
Connect the water filling joint (
3) to the rubber tube to a
tap and fill the tank (
2) of clean water;
• Connect the rubber tube to the bushing (6) and drain the
excess water or dirt (filtered from the cover/partition (
8))
into a sink.
Without water recirculation:
•
Fasten the water filling joint (
3) with the valve, positioned
as in the illustration, to the tank (2) using the fastening nut
(4);
•
Connect the stainless steel “overflow” tube (
7) to the
bushing (6) and fasten it to the tank with the nut (5);
• Connect the rubber tube to the bushing (6) and drain the
excess water or dirt (filtered from the cover/partition (
8))
into a sink.
•
Manually fill the tank with clean water.
1
1
2
4
3
5
6
7
8
2
3
4
5
6
7
8
