Modello - Modèle - Model
Modell - Modelo
COUNTER 21 / COUNTER 50 / COUNTER 68 /
COUNTER 98
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
PAGE
23/64
N° DOC
22. MAINTENANCE
WARNING!
Maintenance must be carried out by technical staff trained and
enabled for intervention on the flammable refrigerants.
WARNING!
Any work carried out on the appliance by the user strictly requires
the power plug being disconnected from the mains socket.
ATTENTION!
Use protective shoes and gloves during maintenance operations.
OPERATION
FREQUENCY
ORDINARY /
EXTRAORDINARY
MAINTENANCE
AUTHORISED
STAFF
Cleaning of external surfaces
Based on use
Ordinary
User
Cleaning of accessible internal parts (no use of tools)
Based on use
Ordinary
User
Seals intactness check
Yearly *
Ordinary
Technical support
Water collection tank cleaning
Yearly *
Ordinary
Technical support
Checking and cleaning the condenser if necessary
Yearly *
Ordinary
Technical support
Replacement components and parts
-
Extraordinary
Technical support
Any other maintenance operation not planned in the previous points should
be carried out by the support centres authorised by our dealers or by
qualified staff.
* Recommended frequency for optimal counter operation and maintenance of full efficiency.
23. TANK CLEANING
WARNING! TURN OFF POWER SUPPLY TO THE CABINET BY DISCONNECTING
THE POWER PLUG BEFORE CLEANING.
By tank cleaning, proceed as follows:
1.
Place the goods in special refrigerated containers, kept at the same temperature and
remove the shelves.
2.
Leave the doors open and begin the operation of tank washing when the tank temperature
is the same as the ambient temperature.
3.
Before cleaning the tank the inside temperature must be equal to the ambient temperature.
4. Proceed with washing and drying the internal chamber with a cloth using neutral PH
detergent and fresh water.
5. Clean the surfaces with a cloth, using neutral PH detergent, rinse and dry.
6. Clean the height adjusters supporting the levels with a jet of air.
7. Avoid water entering into the appliance lighting units.
8.
Then plug the unit and wait till the appliance reaches the right temperature before filling
it again
Do not use any aggressive or abrasive cleaning agents.
Never use a water hose or a high-pressure jet to clean the cabinet.
ATTENZIONE! Non
usare getti d’ acqua nelle operazioni di pulizia: si possono
danneggiare le parti elettriche.
ATTENZIONE!
Non usare dispositivi meccanici o altri mezzi per accelerare
il processo di sbrinamento, diversi da quelli raccomandati dal costruttore.