YWG
3.2. Changing the Printer Setting
In “General” tab of <Figure 33>, you can see the printer model and specification.
3.2.1 Basic Printing Setting
There are 3 tabs of Layout,
Paper/Ribbon/Quality, and
Side/Media.
(You can set the options for
printing in the window of
<Figure 33>.)
.2.1.1 Layout tab
- You can select either horizontal or vertical
printing direction. To apply your selection,
click “OK” button.
(Caution! Default value is recommended in
advanced option. If you want to change
the value, please contact I&A System
Reseller.)
3.2.1.2 Paper / Ribbon / Quality tab
You can set the type of paper, ribbon,
and quality as <Figure 35>.
- Paper Tray
Select tray and card type option.
SMART has only one hopper and supports
only CR-80 type card. You need not to change
default value in this option.
- Ribbon
You can see the type of ribbon. SMART
identifies ribbon type automatically with RF Tag.
You do not need select the ribbon type.
- Resin
<Figure 35> Paper/Ribbon/Quality
<Figure 33> Printing Setting
G
<Figure 34> Layout
G
