YG
Copyright Notice
Users must respect the copyright laws applicable in their country. This manual must not be
photocopied, translated, reproduced or transmitted in whole or in part for any reason and
by the means that might be, albeit electronic or mechanical, without the express, written
authorization of the company I&A System card printer.
All information contained herein may be subject to modification without prior notice.
I&A System card printer accepts no liability for any possible errors herein, nor for any
accidental damage or damage caused through the dissemination or the use of this manual.
Trademarks
Smart is a trademark and I&A System is a registered trademark of I&A System card printer.
Windows is registered trademarks of Microsoft Corp. All other trademarks or registered
trademarks are marks of their respective holders. Smart Design is a trademark of I&A
System.
Return Materials Authorization
In order to make a warranty claim you must contact an I&A System Reseller. You will be
responsible for packaging the printer for shipment and the costs of shipping and insurance
of the printer from the point of use of the printer to the I&A System Reseller. The I&A
System Reseller will bear the costs of shipping and insuring the printer from the repair
location to the address from which the printer was shipped.
Before returning any equipment for in-warranty or out-of warranty repair, contact an I&A
System Reseller or an I&A System Service Center for a Return Materials Authorization
(RMA) number. Repack the equipment in the original packing material and mark the RMA
number clearly on the outside of the box. For more information about RMA or I&A System
warranty statements, refer to the Warranty booklet on the quick install guide.