10
CALIBRATION
User adjustable / factory calibration.
2vZero
0.01000
Zero counts in 2Vdc mode
Calibration of the 18bit DAC output.
2vSpan
2.00000
Span counts in 2Vdc mode
Calibration of the 18bit DAC output.
10vZero
0.0000
Zero counts in 10Vdc mode
Calibration of the 18bit DAC output.
10vSpan
10.0000
Span counts in 10Vdc mode
Calibration of the 18bit DAC output.
Out.Vdc
Output monitor Span counts
Calibration of the output DC voltage monitor.
Batt.Vdc / DC Inp.Vdc
Battery / Ext. power supply Vdc Span counts
Calibration of the Battery & external DC supply
for the main screen.
Charge mA
Charge current Span counts
Calibration of the battery charging current monitor.
Use the menu options as detailed at the bottom of the screen to navigate the various entries, Quit, Save
etc. Please note that LOAD.DEF will load pre-set factory settings and NOT your as-shipped custom
settings. See the Calibration record at the back of this manual for YOUR settings.
Any changes to settings are saved to EEprom.
Note: If you decide to make any adjustments to the above settings/calibration then please record the
original settings before you start.
