- 29 -
How to take care of your iameco
™
monitor
•
Shut down your monitor and disconnect from mains.
•
When cleaning the monitor case or the surface of the TFT-LCD, wipe with a slightly moistened, soft
fabric cloth. Be careful not to scratch casing or glass.
•
Do not spray detergents directly on the monitor. Spray the recommended detergent onto a smooth
cloth and clean.
•
Do not place liquids, chemicals or any metal objects on the monitor. This may cause damage, electric
shock or a fire. If a foreign substance gets into the monitor, disconnect from AC power and then
contact
iameco
™
service centre.
•
Do not paint your monitor’s wooden frame. Use damp cloth to clean the wooden frame of the monitor.
•
Before you lift or reposition your monitor, disconnect all cables and cords connected to it. To lift or
move your monitor, firmly grasp both the display and stand sections.
Other safety instructions
•
Do not display a still picture for a long period, as this could cause a residual image. If the brightness is
adjusted to the minimum setting, it may be difficult to see the screen.
•
Let your eyes rest for 5 minutes for each hour of looking at the monitor. This will reduce eye fatigue.
•
Do not use or store inflammable substances near the monitor.
•
Do not move the monitor by pulling the wire or the signal cable.
•
Do not add accessories that have not been designed for this monitor.
•
Keep the monitor away from any magnetic substances and do not touch screen as this may damage
the monitor and may cause discolouring or distortion of the image.
•
The quality of the computer signal may influence the quality of the display. We recommend using a
computer able to emit high quality video signals.
•
Never rub or tap the monitor with hard objects.
If the size of your monitor is small, or if the same image is present for long periods of time, you may see
after images due to damage to the fluorescent substance on the inside of the TFT-LCD.
Repair of your iameco
™
monitor
This monitor has no user-serviceable parts. Do not attempt to open your monitor. This may cause an
electric shock or a fire. Only authorised
iameco
™
service personnel should remove the casing, by doing so
you invalidate your warranty! If the warranty seal is broken this will invalidate your warranty.
If an unauthorised person opens your monitor, you risk damaging your equipment, and such damage is
not covered by the limited warranty on your monitor. All spare parts are available from
iameco
™
and can
only be nstalled by official service centres. Visit www.iameco.com for updated information.
i
If your monitor is not operating normally or if there are any unusual sounds or smells coming from it,
unplug it immediately and contact your
iameco
™
service centre.
Before contacting us
In many cases, your monitor may not need repair. Before you contact us, please consult the
troubleshooting section to see if you can easily remedy the problem yourself. Refer to page no 24. You
can find the addresses of
iameco
™
service centres in page no 37.
MicroPro Computers
98 Nutgrove Avenue,
Rathfarnham,
Dublin 14,
Ireland.
Tel: +353 (0) 1 4930514
Fax: +353 (0) 1 4943885
