MAN-79
DELLORTO VHSB 36 RD CARBURETTOR SETTING
X30 SUPER SHIFTER 175cc BASIC SETTING
Max. jet. = 180
Atomizer = DQ 267
Fuel needle = 350
Idle jet. = 65
Needle = K19 (3ª notch)
Throttle valve = 50
Starter jet = 60
Float = 4g x2
Idle emulsion tube = CD1
To check / to update by the customer
IMPORTANT TANK LEVEL SETTING: THE SHEET HOLD FLOAT MUST BE PARALLEL TO
THE BODY CARBURETTOR FLANGE AS SHOWN.
If we remark a different value, please operate on the two metallic plates which
support the floats, to obtain the prescribed level.
We recommend to check the level value of both floats, to obtain the same.
Whenever an optimum carburettor setting is required in each condition, it will
have to be performed by acting on the adjusting elements to better fit the most
proper mixture title according to the track and environmental characteristics.
The operations to be performed for a fine setting require a specific experience
which cannot be acquired only through the support of these few lines; our target
is to give simple suggestions to find the best carburettor setting according to the
operating conditions.
ATTENTION:
THE BASIC SETTING CARBURETTOR IS DELIBERATELY VERY RICH, PLANNED
FOR EXTERNAL TEMPERATURE OF
10°C
, NOT BEING POSSIBLE TO FORESEE
WICH WILL BE THE CONDITIONS OF THE FIRST USE OF ENGINE.
10
TANK FLANGE
PARALLEL
