18
MAN-88 – UK
Before assembling the clutch, degrease with diluent the shaft taper, the conical hole on the
clutch body, the clutch drum.
Clutch reassembly
TOOLS
1.
Insert key on shaft.
2.
Install clutch body and cone safety washer on shaft.
3.
Install the M16x1 nut using the clutch wrench.
ATTENTION: turn counterclockwise as nut has left
thread.
§
Clutch wrench CH 24
§
Special tool S 1436/2
(torque at 65 ÷ 75 Nm - 575 ÷ 665 in-lb)
5.
Install the internal washer and the O-ring.
ATTENTION: install washer with chamfer towards
internal part of engine.
Clean the roller cage and grease it before installing
on the crankshaft.
1.
Install the clutch drum and the external washer.
ATTENTION: install washer with chamfer towards
internal part of engine.
2.
Using the special tool S 1436/2 (or clutch wrench
CH 24) and hooking itself to the clutch body for
blocked the crankshaft, install and tighten the
M10 nut.
§
Clutch wrench CH 24
§
Special tool S 1436/2.
§
12 Point wrench - 17 mm
(torque at 30 ÷ 40 Nm - 265 ÷ 350 in-lb)
3.
Install the clutch cover (3 screws M6).
§
Allen 5mm.
(Torque at 8÷10 Nm - 70 ÷ 90 in-lb)
