IAI ROBO Cylinder RCS4- SA4C, Инструкция по эксплуатации

Страница: 73 / 146

2.3 How to Install
2-16
2. Installatio
n
Mounting transported objects
[For SA4C/R, SA6C/R, SA7C/R]
● Use the tapped mounting holes on the top surface of the slider to fix transported objects.
● There are 4 reamed holes on the top surface of the slider.
Use these reamed holes if repeated attaching and detaching is required.
● If fine-tuning of perpendicularity, etc. is required, use one of the reamed holes
for this adjustment.
● Refer to the figure below for the screw-in depth and reamed hole depth.
Model
Name
A B C Reamed Hole
Tapped Hole
M
Mounting Bolt
Bolt Nominal
Diameter
Tightening Torque
SA4C,
SA4R
20 24 32
φ
3H7Depth6 M3Depth7 M3 0.83N
•
m(0.085Kgf
•
m)
SA6C,
SA6R
31 32 50
φ
5H7Depth6 M5Depth10 M5 3.42N
•
m(0.35Kgf
•
m)
SA7C,
SA7R
39 42 65
φ
5H7Depth10 M5Depth10 M5 3.42N
•
m(0.35Kgf
•
m)
Pitch tolerance from reamer ± 0.02