IAI GO-2400C-USB, Руководство пользователя, Страница: 55 / 61

— 55 —
GO-2400M-USB / GO-2400C-USB
Specifications
Item GO-2400M-USB GO-2400C-USB
Scanning system Progressive scan, 1 tap
Synchronization Internal
Interface USB 3.0 Vision (Specification V1.0 RC4.02) compatible
Image sensor 1/1.2-inch monochrome CMOS 1/1.2-inch Bayer color CMOS
Image size (effective image) 11.3 (H) × 7.13 (V), 13.4 mm diagonal
Pixel size 5.86 (H) × 5.86 (V) µm
Effective image pixel output 1936 (H) × 1216 (V) 1936 (H) × 1216 (V)
Acquisition Frame
Rate (max)
❖
The minimum
value is 0.125
fps for all.
8-bit H1, V1 159 fps 159 fps
Binning H1, V2 164 fps —
H2, V1 164 fps —
H2, V2 164 fps —
10-bit
packed /
12-bit
packed
H1, V1 127 fps 127 fps
Binning H1, V2 127 fps —
H2, V1 127 fps —
H2, V2 127 fps —
10-bit /
12-bit
H1, V1 79 fps 79 fps
Binning H1, V2 127 fps —
H2, V1 127 fps —
H2, V2 127 fps —
EMVA 1288 parameters
Absolute sensitivity
Maximum SN ratio
At 12-bit output
9.44p (λ = 525 nm)
45.16 dB
At 12-bit output
10.86p (λ = 525 nm)
45.23 dB
SN ratio (traditional method) 60 dB or more (typical)
(0 dB gain, Black)
60 dB or more (typical)
Dark compression ON: 50 dB
(typical)
(0 dB gain, Green Black)
Digital image
output format
Full pixel 1936 (H) × 1216 (V) Bayer 1936 (H) × 1216 (V)
ROI Width 16 to 1936, 16 pixels/step 16 to 1936, 16 pixels/step
Offset X 0 to 1920, 16 pixels/step 0 to 1920, 16 pixels/step
Height 1 to 1216, 1 line/step 2 to 1216, 2 lines/step
Offset Y 0 to 1215, 1 line/step 0 to 1214, 2 lines/step
Binning H 1 1936 (H) 1936 (H)
2 968 (H) —
V 1 1216 (V) 1216 (V)
2 968 (V) —
Pixel Format Mono8, Mono10, Mono10
Packed, Mono12,
Mono12 Packed
BayerGR8, BayerGR10,
BayerGR10 Packed, BayerGR12,
BayerGR12 Packed
Trigger selector Exposure Frame Start
Exposure modes Off, Timed (EPS), Trigger Width (PWC)
Trigger overlap Off
Trigger input signals Line 5 (Opt In), Software, PG0, NAND Out 0/1
Exposure modes Timed 6 µs (8-bit), 7 µs (10-bit) (min) to 8 s (max), variable unit: 1 µs
❖
Performance verified for up to 1 second.
Trigger Width 6 µs (8-bit), 7 µs (10-bit) (min) to 8 s (max)
❖
Performance verified for up to 1 second.
Auto exposure (Exposure Auto) Off, Continuous
Auto exposure response speed
(AGC/ASC Control Speed)
1 to 8
Video send modes Normal Mode
,
Trigger Sequencer Mode, Command
Sequencer Mode, Multi Mode
Digital I/O Line Selector (6P): GPIO IN / GPIO OUT
Black level
adjustment
Default level 33LSB (during 10-bit output)
Video level adjustment range R/B: 20 to 60 (during 10-bit output)
Adjustment range –33LSB to +64LSB against reference level (during 10-bit output)
Resolution adjustment 1 STEP = 0.25LSB