IAG Performance | 1203 Baltimore Blvd. Westminster, MD 21157 | Ph: 410-840-3555 | www.iagperformance.com
3
Install
:
4. Place the IAG battery tie down on top of the battery
with the logo facing the direction you prefer.
4.
5. Pull the short j-hook through the bottom of the tie
down (on the back side of the battery) and hook it into the
chassis. Thread a flange nut onto the j-hook until it is hand
tight.
5.
6. Pull the long j-hook through the bottom of the tie down
(on the front side of the battery). Thread a flange nut
down several turns. Now push the j-hook down and secure
the j-hook into the chassis. Hand tighten the nut.
6.
