IAE FLAT ROOF SMOKING SHELTER, Руководство по сборке и обслуживанию

Страница: 7 / 12

Plastic Installation
6
Before fitting the sheet, IAE advise that the mid purlins are pre drilled using a drill screw.
Drill until it starts to thread then remove and clean to remove all swarf.
When the shelter is
supplied without the front
panel, the side panels
occupy the full width of
the shelter.
When the shelter is
supplied with the front
panel, the side panels only
occupy the rear half of the
shelter.
Fig 16
Fig 17
· Pre drill ø10mm holes in sheet first to match purlins.
· Fix the sheet to the mid purlins using 5.5x32mm drill screws.