IAE FLAT ROOF SMOKING SHELTER, Руководство по сборке и обслуживанию

Страница: 4 / 12

Frame Assembly
3
Sit the support feet into the bottom of
the shelter end frame sections. Do not
fix the feet to the frame at this point.
Starting from the bottom, bolt the 5no
horizontal rails in place between the end
sections using M10 x 70 socket dome
head screws.
Fit the vertical brace between the rear
rails using M10 x 70 dome head screws.
The sequence of images is not representative of assembly order, use as a
guide for bolt selection only.
Fig 6
Fig 7
Fig 8