the value of the dose accumulated since the last switching on or the total summarized value for
all the periods of working according to your choice made by the push-buttons
«˄»
or
«˅».
Note. The human body accumulates the radiation dose that’s why while staying at the
locations with the elevated levels of radiation for a long time it’s necessary to summarize the
continuous readings taken from an individual detector. The Radiation meter EcoLife Pro1
automatically summarizes the accumulated dose from the moment of switching on and for all the
periods of working. 3 millisieverts per hour is the normal annual background radiation dose
considered safe. During the life the accumulated dose value must be below 100-700 millisieverts
summarized (according to the local radiation background).
1.4.4. Control buttons are used to:
- switch the device on and off;
- switch to the Option menu;
- navigate through the Option menu and choose the values;
- switch to the Measurement mode;
- switch the screen off when the device in work (Power economy mode).
1.4.5. The power supply is carried out by two AAA batteries or by the accumulators of the
same type. How to install batteries into the case you can see on the battery
compartment’
s
bottom or at the Figure 4.
Fig. 4 –Batteries installation scheme
2. Correct use
2.1 Use Limits
2.1.1. Keep the battery compartment and the power supply contacts clean.
2.1.2. Timely change the discharged batteries or charge the accumulators.
