5
i3TOUCH
V- SENSE 7003T10 - operations manual
1.1.2.10 Bend the outdoor antenna cable downwards at the location where it comes in the house so that
rainwater does not flow in
» If rainwater enters the product, it may result in electric shock or fire.
1.1.2.11 Install the antenna far away from any high voltage cables.
» If the antenna touches or falls onto a high voltage cable, it may result in electric shock or fire
Caution
1.1.2.12 Do not let the product drop while moving it.
» This may result in a problem with the product or injury.
1.1.2.13 Do not place the product face down on the floor.
» This may damage the panel of the product.
1.1.2.14 When installing the product on a console or shelf, make sure that the front of the product does not
protrude out of the console or shelf.
» Otherwise, this may cause the product to fall off and result in a malfunction or injury.
» Make sure to use a cabinet or shelf suitable to the size of the product.
1.1.2.15 When putting the product down, handle it gently.
» Otherwise, it may result in a problem with the product or injury.
1.1.2.16 If the product is installed in a location where the operating conditions vary considerably, a serious
quality problem may occur due to the surrounding environment. In this case, install the product only
after consulting one of our service engineers about the matter.
» Places exposed to microscopic dust, chemicals, too high or low temperature, high humidity, airports
or stations where the product is continuously used.
1.1.3 Cleaning Related
Warning
1.1.3.1 Before cleaning the product, unplug the power cord.
» Otherwise, it may result in electric shock or fire.
1.1.3.2 When cleaning the product, do not spray water directly over the product parts.
» Make sure that water does not enter the product.
» Otherwise, it may result in fire, electric shock or a problem with the product.
Caution
1.1.3.3 Avoid spraying cleansing agent directly onto the product.
» This may result in discoloration or cracking of the exterior of the product or the panel coming off.
1.1.3.4 When cleaning the product, disconnect the power cord and clean the product with the supplide
cleaning cloth.
» Avoid using chemicals such as wax, benzene, alcohol, thinner, mosquitorepellent, fragrance,
lubrication or cleansing agent when cleaning the product, This may result in the exterior being
deformed or the print being removed.