background image

EtherLan User Guide

*EHinfo

I mmediate command

Displays network driver module internal statistics

syntax

*ehinfo

Use

This is the EtherLan version of the Devicelnfo command described in the AUN

Manager's Guide.

The EHinfo command displays information about driver status and activity; for example the full Ethernet address
i s displayed as well as the type of network to which the computer is attached. It is primarily provided as an aid to
testing and trouble-shooting.

_10-

Example l: EHVirtual configured off

*ehinfo

EtherH Version

4.19 O i-cubed ltd. 1996

Card Info:-

i-cubed, EtherLan 600 Ethernet interface

Unit 0, slot 8, 16-bit driver.

Ethernet address=00:c0:32:00:54:9a

10Base2 (coax) interface in use.

I/O Stats:-

Rxframes=2, Rxerrs=0, Txframes=2, Txerrs=0, DMAframes=0

Collisions=

0 , Rejects=0

Frame Info:-

Type--8035 FrmLvl=1 AddrLvl=1 ErrLvl=O Handler=219a5f8
Type= 806 FrmLvl=1 AddrLvl=1 ErrLvl=O Handler=219a5f8

Type= 800 FrmLvl=1 AddrLvl=1 ErrLvl=O Handler=219a5f8

Controller Mode:- Normal, reject frames with errors

Example 2: EHVirtual configured on

*ehinfo

EtherH Version

4.19 © i-cubed ltd. 1996

Card Info:-

i-cubed, EtherLan 600 Ethernet StrongARM interface
Unit 0, slot 8, 16-bit driver.

Ethernet address=00:c0:32:00:74:41

10BaseT (twisted pair) interface in use

I/O Stats:-

Rxframes=17, Rxerrs=0, Txframes=36, Txerrs=0, DMAframes=0
Collisions=0, Rejects=2

Interface:-

Twisted pair interface:- link is good

Frame Info:-

Type= 8 035 FrmLvl=1 AddrLvl=2 ErrLvl=O Handler=3a4d3ac
Type= 806 FrmLvl=1 AddrLvl=2 ErrLvl=O Handler=3a4d3ac
Type= 800 FrmLvl=1 AddrLvl=2 ErrLvl=O Handler=3a4d3ac

Controller Mode:- Promiscuous, reject frames with errors

Card Info:-

i-cubed, EtherLan 600 Ethernet Virtual StrongARM interface

Unit 1, slot 8, 16-bit driver.

Ethernet address=00:c0:32:80:74:41

10Base2

(coax) interface in use.

I/O Stats:-

Rxframes=10, Txframes=29

Interface:-

Twisted pair interface:- link is good

Frame Info:-

Type=IEEE FrmLvl=4 AddrLvl=2 ErrLvl=O Handler=21c3b68

Type=8035 FrmLvl=1 AddrLvl=2 ErrLvl=O Handler=21c3b68
Type= 806 FrmLvl=1 AddrLvl=2 ErrLvl=O Handler=21c3b68

Type= 800 FrmLvl=1 AddrLvl=2 ErrLvl=0 Handler=21c3b68

Controller Mode:- Promiscuous, reject frames with errors

Содержание EtherLan

















Отзывы: