Rev.
161110
6. Remove the top bracket. This will leave the SBB41 unsecured to the chassis
and allow it to be carefully lifted out afterward.
7. As long as the Sata and Power cables were removed as described in step 3
the SBB41 case can be carefully lifted out of the chassis.
8. Once the case containing the SBB41 is out of the chassis turn it on its side
and remove the screws securing it to the case. There are 6 screws on each
side of the case. Slide the SBB41 out of the case.
9. Place the new unit into the frame. Be sure to set in as shown with the Sata
and Power connectors on the right side of the fan and the frame.
10. Secure the SBB41 into the frame with the 12 screws taken from the
previous unit. Note that with the face of the SBB41 on your right the screws
are placed into the left most column of both pairs of screw holes on the
frame (see step 8 for screw placement details).
11. Place the SBB41 back into the case.
SBB41
INSTALLATION GUIDE
