DB78BB - Back Box
QUICK INSTALLATION GUIDE
i3 INTERNATIONAL INC.
1.866.840.0004
www.i3international.com
U.S.A 4450 Witmer Industrial Estates Unit 4
Niagara Falls, NY 14305
Canada 780 Birchmount Road, Unit 16,
Scarborough, ON, M1K 5H4
Use
silicone
to maintain IP66
rating
DB78BB - Back box
Safety lock screw
3/4” Electrical EMT
Conduit Fitting
Ridgid 3/4” pipe
Use
silicone
to maintain IP66
rating
DB78BB - Back box
Safety lock screw
3/4” Electrical EMT
Conduit Fitting
Ridgid 3/4” pipe
Use
silicone
to maintain IP66
rating
DB78BB - Back box
Safety lock screw
3/4” Electrical EMT
Conduit Fitting
Ridgid 3/4” pipe
1.
Use
silicone
to maintain IP66
rating
DB60 - Goose-neck
Bracket
DB78BB - Back box
Safety lock screw
Use
silicone
to maintain IP66
rating
DB60 - Goose-neck
Bracket
DB78BB - Back box
Safety lock screw
Use
silicone
to maintain IP66
rating
DB60 - Goose-neck
Bracket
DB78BB - Back box
Safety lock screw
Step 6.
Slide the protruding mounting screws through three
matching mounting screw holes on the camera body and rotate the
camera clockwise to secure the camera body on the DB78BB back
box. Use a Phillips screwdriver to tighten three mounting screws in
place.
Step 7.
Replace the camera cover.
Match up the safety lock screw with the screw hole on the camera
body, then push straight down onto the camera cover to engage the
clips. The camera cover will re-attach.
WALLMOUNT
w/ GOOSENECK
BRACKET (DB60)/
Step 1.
Install the i3 Goose-
neck bracket (DB60) on the wall
surface using the hardware and
instructions supplied with the
goose-neck bracket.
DB60 -
Goose-neck
Bracket
DB78BB -
Back box
Safety lock screw
Use silicone
to maintain
IP66 rating
Use
silicone
to maintain IP66
rating
DB60 - Goose-neck
Bracket
DB78BB - Back box
Safety lock screw
PENDANT POLE
INSTALLATION
Step 1.
Use a 3/4” Electrical
EMT Conduit Fitting with a
ridgid 3/4” pipe for this type of
installation.
Use silicone
to maintain
IP66 rating
DB78BB -
Back box
Safety lock screw
3/4” Electrical
EMT Conduit
Ridgid
3/4” pipe
...3/4” Electrical EMT Conduit Fitting
Step 2.
Attach DB78BB back box to the threaded end of the...
...and rotate clockwise to attach the two together. Use silicone sealer
as indicated on the diagram to maintain IP66 rating when installing
outside.
Use
silicone
to maintain IP66
rating
DB78BB - Back box
Safety lock screw
3/4” Electrical EMT
Conduit Fitting
Ridgid 3/4” pipe
...goose-neck bracket (DB60)
Step 3.
Remove the camera cover: Use a Phillips screwdriver to
loosen the safety lock screw, then grip the camera cover and flex on
one side, towards the center. Lift UP to remove.
Step 4.
Use a Phillips screwdriver to insert three machine-type screws
provided with the DB78BB back box into the screw holes on the back
box. Leave enough screw length protruding to allow for the camera
body to be rotated onto the screws.
Step 5.
Feed the camera cabling through the...
...gooseneck bracket.
...ridgid pipe bracket.
Step 8.
Use a Phillips screwdriver to re-tighten the safety lock
screw.
