Page
19
of
20
Moving Head Controller 2.0 Manual Rev2
7.
T
ECHNICAL
I
NFORMATION
Maintenance
To maintain optimum performance and minimize wear, The Moving Head Controller 2.0
should be cleaned frequently. Usage and environment are contributing factors in
determining frequency. As a general rule, The Moving Head Controller 2.0 should be
cleaned at least twice a month. Dust build-up reduces the Faders performance and can
cause failure. This can also lead to reduced life and increased mechanical wear. Be sure to
power off fixture before conducting maintenance.
1. Unplug product from power.
2. Use a vacuum or air compressor and a soft brush to remove dust collected on Faders.
3. Clean LCD Screen with a mild solution of glass cleaner and a soft lint-free cotton cloth.
4. Apply solution to the cloth or tissue and drag dirt and grime to the outside of the lens.
Technical
Specifications
WEIGHT & DIMENSIONS
Length
16.0in (405mm) No Mounting ears
18.0in (460mm) With Mounting ears
Width
6.5in (165mm)
Height
3.0in (75mm)
Weight
4.85lbs (2.20 Kg) No Mounting ears
5.85lbs (2.65 Kg) With Mounting ears
POWER
Input Voltage
6 to12 VDC, 500 mA
External Power Supply
100
–240 VAC, 50/60 Hz
General
Rating
Indoors use only
Maximum Ambient Temperature
104 °F (40 °C)
Data Output
3-pin XLR
Data Input
3-pin XLR
Data Pin Configuration
Pin 1 Ground, Pin 2 (-), Pin 3 (+)
Total DMX control channels
512
USB Port
USB 2.0 Port
LCD Screen
Backlit, 20 characters x 4 rows.
Joystick
2 Channel Analog Joystick
WARRANTY INFORMATION
Warranty
2-year limited warranty
