ASSEMBLING THE FLOODLIGHT ONTO THE STAND
First unscrew the black wing-nut (B).
Slide the G-shaped tubular base (A) into black metal clamp at base of the floodlight. Assemble
with the wing-nut through the slot in the black metal clamp.
By loosening the wing-nut (B), you can tilt the floodlight into the desired angle.
Lock the floodlight in place by tightening the wing-nut.
USING THE FLOODLIGHT
Simply plug in the cable of the floodlight to the socket.
SERVICE DEPARTMENT
_
If replacing the power cord is necessary, it should be done by the manufacturer or his agent
to avoid a hazard.
After-sales Service and Application Service
Our after-sales service responds to your questions concerning maintenance and repair of your product
as well as spare parts. Exploded views and information on spare parts can also be found
under:
www.eco-repa.com
I-WATTS application service team will gladly answer questions concerning our products and their
accessories :
STORAGE
_ Thoroughly clean the whole machine and its accessories.
_ Store it out of the reach of children, in a stable and secure position, in a cool and dry place, avoid
too high and too low temperatures.
_ Protect it from exposure to direct sunlight. Keep it in the dark, if possible.
_ Don’t keep it in plastic bags to avoid humidity build-up.
GUARANTEE
For warranty terms, refer to the enclosed warranty conditions
We cannot be held liable for damage caused by incorrect installation or use of the luminaire.
This product must not be modified; Any modification of the product can make it dangerous and voids
the warranty
ENVIRONMENT
Should your machine need replacement after extended use, do not put it in the
domestic waste but dispose of it in an environmentally safe way.
Made in China 2017
Содержание I-SPB10W-700SMD
Страница 2: ...I SPB10W 700SMD I SPB20W 1400SMD...
Страница 3: ...B A...
