background image

Table of content:

Introduction  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..3
Basic functions   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..4
Startup of heating system control   . . . . . . . . . . . . . . . . ..4
Controls and display   . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..7
Air temperature display mode  . . . . . . . . . . . . . . . . . . . . . ..8
Adjustment of built-in ambient 
temperature sensor indicator  . . . . . . . . . . . . . . . . . . . . . . .9
Control of heating system operating conditions   . . . . . . 11
Manual heating control mode  . . . . . . . . . . . . . . . . . . . . . 13
Warranty policy    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Appendix   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Delivery set    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Installation manual and wiring diagram  . . . . . . . . . . . . . .16
Technical Specifications   . . . . . . . . . . . . . . . . . . . . . . . . . .26

Important: 

The Manufacturer's guarantee does not cover mal-

functions caused by mechanical damage, improper installation,
or exploitation for purposes, or under conditions, not provided
by the user and Installation Manual. Please keep in mind that

2

Содержание 710




























Отзывы: