15
Chapter 2. Camera Installation
2-1.
Ceiling Mount installation
Preparation – Remove the dome cover
1. Use the supplied security torx key to loosen (not remove) the
three cover screws.
2. Loosen the three screws (marked with the triangle icon) on
the dome base.
3. Remove the back case.
Fix the camera on the Ceiling & Wall
1)
Paste the Mount hole sticker on the position that you want to install.
2)
A
ccording to your needs, create
5mm (0.1.6”) holes at the T1/T2template positions. Then insert
the screw anchors into the holes. If you want to feed wiring from the hole on the top of the back
case, create a circular opening
(bottom conduit hole) in the mounting surface.
3)
Press the Ethernet cable into the routing path at the bottom of the camera so that the cable will
