55
Recording:
Click this button to setup the type of
triggered recording, storage media and schedule
recording. You can setup the Pre recording & Post
recording period with the video and picture format
on difference storage device. Please refer the detail process as below:
Recording:
Enable the”
Schedule
” recording and you can select “
Continue recording
“
,
“
Start
recording when network failed
” and “
Schedule recording
“ mode. As for the “
Start
recording when network failed
” that will save the video clips on the
SD card, please add the SD
card when you enable this recording mode.
“Triggered recording
”: Setup Pre/Post recording period and maximum period is 10 seconds.
“Recording parameters
” :
Streaming ID:
Select the video streaming which we want to recording.
Save mode:
There are two modes
“Over write when full
“and “
Keep days
“.
Pre-recording:
The time you set to start recording before the scheduled time or the event.
For
example, if an alarm triggers recording at 10:00, and the
pre-record time is set as 5
seconds, the
IP Camera starts to record at 9:59:55.
Post-record:
The time you set to stop recording after the scheduled time or the event. For
